Initial Setup And Login; Defaults; Raidar And Frontview - NETGEAR ReadyNAS 3100 Hardware Manual

ReadyNAS 3100 Hardware Manual

Initial Setup and Login

The estimated completion time for the initial setup is approximately 20 minutes.
Follow the instructions in the ReadyNAS Installation Guide that came with your unit to install
it, and establish the default IP address and login password.
An electronic copy of the installation guide is on the product CD. It can also be found on the
NETGEAR website, and on http://readynas.com/documentation.

Defaults

IP configuration: DHCP
•
If the unit does not get an IP address, it defaults to 192.168.168.168.
Administrator user name: admin
•
Password: netgear1
•
Both the user name and password are case-sensitive.

RAIDar and FrontView

For information about using the ReadyNAS 3100 RAIDar utility and FrontView software to log
in, configure, and manage your system, see the ReadyNAS for Business Software Manual.
The RAIDar utility can discover any ReadyNAS on the network
Note:
without using its IP address.
Chapter 1: Getting Started | 11