Figure 4-27: Network Configuration; Figure 4-28: Ping Test; Figure 4-29: Traceroute Test - Linksys SRW2016 User Manual

WebView Switches
Network Configuration
The Network Configuration screen offers a choice of two tests, Ping and TraceRoute.

Figure 4-27: Network Configuration

Ping
The Ping screen displays the IP address of the location you want to contact.
Select Edit to change the IP address, and select Execute to begin the ping test.
After the ping test is complete, the Ping screen displays the IP address, status, and statistics of the ping test.
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and
press the Enter key.

Figure 4-28: Ping Test

TraceRoute
The TraceRoute screen displays the IP address of the address whose route you want to trace.
Select Edit to change the IP address, and select Execute to begin the traceroute test.
After the traceroute test is complete, the TraceRoute screen displays the IP address, status, and statistics of the
traceroute test.
Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and
press the Enter key.

Figure 4-29: TraceRoute Test

Chapter 4: Using the Console Interface for Configuration 29
Configuring the Switch through the Console Interface