Step 2 Final Set Up; Unlocking And Locking Your Feed And Go - Feedandgo FEED AND GO User Manual

STEP 2 FINAL SET UP

UNLOCKING AND LOCKING YOUR FEED AND GO

We've designed Feed and Go so that smart pets can't cunningly press the buttons on top
of the feeder to help themselves to more food, turn their feeding schedule off or even turn off
the feeding message that you've lovingly recorded. We've created an unlock/lock mechanism
to fool even the smartest of pets. Here's how you unlock/lock your Feed and Go device:
1. If you haven't already, plug the unit into a power outlet near the location where you
wish to feed your pet. And don't worry, as long as the feeder is within your Wi-Fi range,
you will not need to repeat any of the previous steps. If your feeder is connected to your
router via Ethernet cable rather than by Wi-Fi, then it must stay connected at all times.
2. When the feeder powers up, it is initially unlocked.
3. After the Feed (F), Schedule (G) and Audio (H) buttons have been inactive for 20
seconds, the feeder becomes locked.
4. While locked, the feeder will ignore all button presses from the 3 top buttons. The
Volume Wheel (B), Reset button (D) and WPS button (E) at the back of the feeder will
still work though so you can set up your feeder.
5. To unlock the feeder, the Feed (F) and Audio (H) buttons on top of the feeder must be
pressed and held for 2 seconds.
6. The Blue LED (N) on the Schedule button (G), the middle button on top, will blink 3
times to let you know that it's unlocked. You can then use the buttons for their their
normal functions.
7. The feeder will automatically re-lock once there has been 20 seconds of non-activity
of the Feed (F), Schedule (G) and Audio (H) buttons.
12