PrintServer for USB with 4-Port Switch
The Front Panel
The PrintServer's LEDs, where information about network activity is displayed, are located on the front panel.
Figure 2-2: The USB PrintServer's Front Panel
Status
Green. The Status LED will remain continuously lit when a printer is correctly connected to the
PrintServer. The LED will flicker when print jobs are being transmitted to the printer over the
network.
USB
Green/Orange. The USB LED lights up green when there is a printer connected. The USB LED
lights up orange when there is an error.
1, 2, 3, 4
Green. These numbered LEDs, corresponding with the numbered ports on the PrintServer's
back panel, serve two purposes. If the LED is continuously illuminated, the PrintServer is
successfully connected to a device through the LAN port. If the LED is flickering, the
PrintServer is actively sending or receiving data to the wired network.
Figure 2-3: The USB PrintServer's Side Panel
The Side Panel
Power
The Power port is where you will connect the power adapter.
Chapter 2: Getting to Know the USB PrintServer
The Front Panel
5