Starting The Engine - Schwarzbau AG-HA-6500 Owner's Manual

3. Starting the engine

(1) Disconnect any load from the AC socket, and turn off the alternating
current circuit breaker.
(2) Turn the fuel valve to "ON" position.
(3) Turn the wind-block color rod to
"CHOKE" position.
(4) Turn the engine switch to "ON"
position.
(5) Pull the starting handle slightly until
you feel some resistance, then put forth
your strength to pull it.
(6) When the temperature of engine increase,
pull back the wind-block door rod. See the
arrow in the diagram.
4