Battery Use; Insert The Battery - NETGEAR Fuse User Manual

Battery Use

The following topics explain how to insert and remove your device's battery.
Battery Cautions
Storage: Avoid storing or leaving battery with no charge remaining. Saved information and settings
may become lost or changed, or battery may become unusable. Charge once every six months
before storing or leaving unused for a long period.
Bulges: Depending on use, bulges may appear near end of battery life. This does not affect safety.
Replacing Battery: The battery is a consumable item. It needs to be replaced if operating time
shortens noticeably. Purchase a new battery.
Cleaning: Clean soiled terminals between battery and device with a clean, dry cotton swab. Soiled
terminals can result in a poor connection and prevent charging, etc.

Insert the Battery

Before you use your device, install the battery.
1. At the antenna connector shown below, lift the raised edge of the battery cover to remove it.
2. Insert the battery into your device, contacts end first.
Make sure that the battery contact points align with those inside the battery compartment.
l
Get Started 8