Download Print this page

QOLSYS QS-1311-P01IQ PINpad Installation Manual page 2

Advertisement

Specifications
Not supervised.
Replacement Battery:
CR2032 Lithium / Manganese Dioxide
Temperature Range:
0F to 120F
Housing dimensions:
2x2.25x0.33 inches
1-way RF:
Does not receive panel status
Design & Manufacture:
Resolution Products, Inc.
Specifications subject to change without notice.
Notices
Verify proper enrollment and operation, per control panel installation instructions, at installation.
PINpad™ is a Trademark of Resolution Products, Inc.
Warranty
Qolsys will replace products that are defective in their first two years.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void
the user's authority to operate this equipment.
FCC ID: U5X-RE152
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil est conforme avec d'Industrie Canada RSS standard exempts de licence. Son
fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE152
Page 3 of 3
QS-1311-P01_Qolsys IQ PINpad.doc
www.ResolutionProducts.com
17-Sep-13

Advertisement

loading