Figure 5-19: Wireless Tab - Wireless Security (Wep) - Linksys WRT54GX User Manual

Wireless-G Broadband Router with SRX
WEP. WEP is a basic encryption method, which is not as secure as WPA. To use WEP, select a Default Transmit Key
(choose which Key to use), and a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. Then
either generate a WEP key using the Passphrase or enter the WEP key manually.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes. For detailed instructions on configuring wireless security for the Router, turn to
"Appendix B: Wireless Security."
Chapter 5: Configuring the Wireless-G Broadband Router
The Wireless Tab - Wireless Security
IMPORTANT: If you are using WEP
encryption, always remember that each
device in your wireless network MUST use
the same WEP encryption method and
encryption key, or else your wireless network
Figure 5-19: Wireless Tab - Wireless Security
(WEP)
20