DATASONICS SIS-1500 System Manual page 40

3-4
Box #3
TTV-195 Tow Vehicle
(5) tail fins
(1) spare shear pin
(1) 1/4" drive palm ratchet extension
Box #4
75 meter Kevlar reinforced deck cable
Volume I, SIS-1500 system manual
Volume II, Chirpscan
Volume III, Chirpscan
Manuals for optional components
MO disks (2, with magneto-optical drive option only)
Before opening the boxes, inspect them for any signs of external damage.
Immediately report any damage to Datasonics and to the freight carrier.
Perform the steps below to remove the items from the boxes.
1. Carefully remove the SIP-150 Sonar Image Processor from its box, and
then remove the cables from the compartment that is at the bottom of the
box.
2. Carefully remove the monitor from its box along with the monitor cable
and the AC power cable.
3. Remove the tiedown straps that secure the TTV-195 Tow Vehicle and
remove the tow vehicle from its box
4. Remove the 75 meter Kevlar reinforced deck cable, the manuals and
disks, and any optional equipment.
5. After removing the contents, inspect the items for any damage before
setting up. Do not operate or deploy any equipment that appears to have
been damaged in shipping.
Volume I System Manual
3
manual
3
disks
DATASONICS
June 1998