Access Restrictions > Internet Access - Linksys Wireless-N Broadband Router WRT160N User Manual

Chapter3
Group Account
Group Account Screen
To add a new group:
1. Enter a name for the new group.
2. Enter a description for the new group.
Select read and wrte or read only access.
3.
Click Save Settngs to save the new changes, or click
4.
Cancel Changes to cancel the changes. Click Close to
close the screen.
Each group you created on the Group Account screen will
be listed with its access, which you can edit or delete.
Select Edt to edit a user or Delete to delete the user.
If you click Edt, the Group Account screen appears. Refer
to the "Group Account Screen" section.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes. For more information,
click Help.
Access Restrictions > Internet Access
The Access Restrictions > Internet Access screen allows you
to deny or allow specific kinds of Internet usage and traffic,
such as Internet access, designated services, and websites
during specific days and times.
Dual-Band Wreless-N Ggabt Router wth Storage Lnk
Advanced Configuration
Access Restrictions > Internet Access
Internet Access
Internet Access Polcy Internet Access can be managed
by a policy. Use the settings on this screen to establish an
access policy (after Save Settngs is clicked). Selecting a
policy from the drop-down menu will display that policy's
settings. To delete a policy, select that policy's number
and click Delete. To view all the policies, click Summary.
Deny or Allow If you select Deny, the PC on the Edit List
will be denied Internet Access by the dates and times
selected. PCs not on the list will still have Internet access. If
you select Allow, the PCs on the Edit List will have Internet
access by the dates and times selected. The PCs not on the
Edit List will not have Internet access. If there is a conflict
with a policy, the lower numbered policy will have priority
over a higher numbered policy.
To create an Internet Access Policy:
1. Select a number from the Internet Access Policy drop-
down menu.
2. Enter a Policy Name in the field.
3. To enable this policy, select Enable.
4. Click Edt Lst of PCs to select which PCs will be affected
by the policy. The List of PCs screen appears. You can
select a PC by MAC Address or IP Address. You can also
enter a range of IP Addresses if you want this policy
to affect a group of PCs. After making your changes,
click Save Settngs to apply your changes or Cancel
Changes to cancel your changes. Then click Close.
20