Linksys Wireless-N Gigabit Security Router with VPN WRVS4400N Quick Installation Manual page 2

E
For the Connection Type
setting, six connection types
are offered through the
drop-down menu. Each Setup
screen and available features
will vary depending on which
connection type you select.
If using PPTP, Heartbeat
Signal, or L2TP, refer to the
User Guide on the CD.
Internet Connection Type
Automatic Configuration -
DHCP: If you are connecting
through DHCP or a dynamic IP
address from your ISP, keep
this default setting. Automatic - DHCP
Static IP: If your ISP assigns
you a static IP address, select
Static IP from the drop-down
menu. Complete the Internet
IP Address, Subnet Mask,
Default Gateway, and DNS
fields. You need to enter at
least one DNS address.
PPPoE: If you are connecting
Static IP
through PPPoE, select PPPoE
from the drop-down menu.
Complete the User Name and
Password fields.
F
When you are finished
entering your Internet
connection settings, click the
Save Settings button to save
your changes.
PPPoE
G
To configure the Router for
your wireless network, select
the Wireless Tab's Basic
Wireless Settings screen.
H
Network Name (SSID). The
SSID is the network name
G
shared by all devices in a
wireless network. It is
case-sensitive and must not
have more than 32 characters
(use any keyboard character).
For added security, change
the default SSID (linksys) to a
unique name.
I
Select the Wireless Network
Mode.
Mixed: If your network has
Wireless-N, -G, and -B devices,
then keep the default, Mixed.
Disable: To disable wireless
networking, select Disable.
J
Wireless Channel. Select the
appropriate channel to be
used between your Wireless
Router and your client
devices. The default is channel
6. You can also select Auto so
that your Wireless Router will
select the channel with the
lowest amount of wireless
interference while the system
is booting up.
K
Wireless SSID Broadcast.
When wireless clients survey
the local area for wireless
networks to associate with,
they will detect the SSID
broadcast by the Router. To
broadcast the Router's SSID,
keep the default, Enabled. If
you do not want to broadcast
the Router's SSID, then select
Disabled.
L
When you are finished
entering your Basic Wireless
Settings, click the Save
Settings button to save your
changes.
M
Power your broadband
modem off and back on again.
N
Restart or power on your PCs
so they can obtain the
Router's new settings.
O
To test the Router's settings,
open your web browser from
any computer. In the
browser's Address field, enter
www.linksys.com/registration
and press the Enter key.
For more advanced
NOTE:
settings and security options,
refer to the User Guide on the
WRVS4400N CD.
3
Configure Wireless Security
A
Open the Router's Web Utility
as shown in Step 2, and select
the Wireless Tab's Wireless
Security screen.
B
Select a security method:
WPA-Personal
For WEP, WPA Enterprise,
WPA2-Enterprise, and
WPA2-Enterprise Mixed, refer
to the User Guide on the CD.
For WPA-Personal,
WPA2-Personal, and
WPA2-Personal
WPA2-Personal Mixed,
follow the instructions below:
Select the option you want,
WPA-Personal,
WPA2-Personal, or
WPA2-Personal Mixed.
For additional information or troubleshooting help,
refer to the User Guide on the Setup CD-ROM. You
Configure the following: can also call or e-mail for further support.
24-hour Technical Support
Encryption - If WPA-Personal
800-326-7114
is selected, select the method
(toll-free from US or Canada)
you want to use, TKIP or AES.
E-mail Support
support@linksys.com
Website
Pre-shared Key - Enter a key
http://www.linksys.com or
of 8-63 characters.
http://support.linksys.com
RMA (Return Merchandise Authorization)
Key Renewal - In most cases,
http://www.linksys.com/support
you can keep the default, FTP Site
ftp://ftp.linksys.com
3600 seconds.
Sales Information
C 800-546-5797 (800-LINKSYS)
Click the Save Settings
button.
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Congratulations! The installation
Cisco Systems, Inc. All rights reserved.
of the Router is complete.
WRVS4400N-QI-60623NC RR