Linksys Etherfast BEFSX41 User Manual page 16

PPPoE
If your DSL provider says that
you are connecting through
PPPoE or if you normally enter
a user name and password to
access the Internet, perform
these steps:
A. Select PPPoE as the WAN
Connection Type. (Shown in
Figure 6-6.)
B. Enter the User Name.
C. Enter the Password.
D. Click the Apply and Continue buttons to save the settings, or click the Cancel
button to clear the settings and start over.
E. When you are finished, click the Status tab, and then click the Connect
button to start the connection. Proceed to step 5.
RAS
RAS is a service used in
Singapore only. (Shown in
Figure 6-7.) If you are using a
RAS connection, check with
your ISP for the necessary setup
information.
When you are finished with the
Setup tab, proceed to step 5.
24
Instant Broadband Series
®
Figure 6-6
Figure 6-7
EtherFast Cable/DSL Firewall Router with 4-Port Switch/VPN Endpoint
®
PPTP
PPTP is a service used in Europe
only. (Shown in Figure 6-8.) If
you are using a PPTP connec-
tion, check with your ISP for the
necessary setup information.
When you are finished with the
Setup tab, proceed to step 5.
HBS
HBS is a service used in
Australia only. (Shown in Figure
6-9.) If you are using a HBS
connection, check with your ISP
for the necessary setup informa-
tion.
When you are finished with the
Setup tab, proceed to step 5.
Figure 6-8
Figure 6-9
25