Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Evo EVO3-FB700DNWDR
Summary of Contents for Evo EVO3-FB700DNWDR
- Page 1 EVO3-FB700DNWDR (S45459) 700TVL DN WDR Camera High Resolution Camera User Manual...
- Page 2 LIMITATION OF LIABILITY THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES - ii -...
-
Page 3: Explanation Of Graphical Symbols
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMEMT. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 4: Ce Compliance Statement
FCC COMPIANCE STATEMENT This equipment has been tested and found FCC INFORMATION : to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the m anufacturer’s instructions. - Page 6 PRECAUTIONS Before installation, carefully read the manual to ensure correct operation and setup, heeding all warnings and instructions. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Ensure manual is kept in good condition for future use. Do not install the device near any heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce heat.
-
Page 7: Table Of Contents
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: Color CCD camera Mini-DIN connector (for video-or dc-type auto-iris lens) -
Page 8: Introduction
INTRODUCTION The camera provided high-quality image using SONY 1/3” CCD and digital signal processing LSIs. Features: 1/3" Super-HADII CCD Super high-resolution (700TVL) Wide Dynamic Range (~x512) (Optional) Day & Night(Auto, Manual, External, Filter delay, Change level adjust) ... -
Page 9: Camera Overview
CAMERA OVERVIEW SIDE VIEW TOP VIEW FRONT VIEW Left Button Up Button Enter Button Right Button Down Button Day / Night External I/O Motion ALARM OUT RS-485 / UTP(optional) ... -
Page 10: Menu Map
MENU MAP Main Menu Low Light ATW/Wide Mode Full Auto+ Privacy Mask Sens-Up ATW/Indoor Suppress ATW/Outdoor Low Light Picture/DNR Apert Fix/Indoor Effect Color Fix/FL System Setup Fix/Outdoor Brightness Visibility Comb Bal Brightness System Setup General General Setup Tools Setup Tools Cam Info System Config Lens... - Page 11 Privacy Mask Picture/DNR Effect Zone Sharpness Freeze Func Resolution d-Effect Color 2D-NR Nega Transparency 3D-NR Mosaic Link Motion dPTZ Preset Frame DNR Demo i-Freeze Shape Rect Color Enh Day/Night Lens EXT-I/O Detection Inter D/N OUT D/N Out Iris Speed Burst Set AUX0 Delay(s) ALARM OUT Alarm Out...
-
Page 12: Camera Adjustment
<Remarks> 1) Menu: Represent present menu subject on top of screen. In case of used Multi-Camset, Represent CAM ID and “camset” name included. Common Headers: : Currently active menu item is displayed. Move by Up/Down keys. : There is sub-menu. Press Enter key going to sub-menu. : Indicates the selected menu item. -
Page 13: Auto Exposure
- R: Adjust red color. - B: Adjust blue color. - Push/Set: Tracking WB of current screen and represent R, B values. - Default: Restore R, B default values. 5) Fix/FL Mode: Fixed color temperature mode (fluorescent lamp environment). 6) Fix/Outdoor Mode: Fixed color temperature (6300 ºK) mode, for outdoor environment. - Page 14 - Spot: Weight on the specified area of AE. 6) Brightness: Adjust AE reference level. <Mask> Up to 10 Privacy Zones can be configured. Because they share area ID with PVA Zones, they cannot use the same ID. 1) Zone: Select mask number. NOTE: *If you see "PVA"...
- Page 15 * Do not use this as a signal to start video recording. * The abandon/absent detection can be inaccurate. Scene Change: Detect a change in the screen. NOTE: * This is good for detecting scene changes, including vertical lines or high contrast objects of the background.
- Page 16 : Send event to counting machine (OFF: No Effect/INC: Increment counting value/DEC: Decrement counting value). NOTE: * The counting value can be inaccurate. Screen: Printed event at bottom side by side scrolling. Icon Subject Range Motion occurred. Rect, Poly, Motion Line Motion occurred in the area.
- Page 17 Detect object moving. From bottom to enter of Rect In & Out area, detecting direction of moving out. Direction *) Don’t use as a signal for starting video recording. *) Not supported in Simple mode. Event will occur the object moves in a Line Move clockwise direction that start around.
-
Page 18: System Setup
NOTE: * Priority: Tracking priority: Zone > Loitering > Abandon/Absent > Obj. * Maximum 4 objects can be represented. * Same priority: Continuing detect. And Obj. > Size - All Object: Tracking all detected objects. - Loitering: Tracking detected loitering object. - Abandon/Absent: Tracking detected absent/abandon area. - Page 19 - Title: Change camera title (max. of 8 characters). - Display: Configurations for display camera ID & title. Cam ID: Select camera ID display on/off. Title: Select title display on/off. Display Pos: Change position the string location. - Language: Change menu OSD language. 2) Setup Tools - System Config Multi-Camset: Select On (user can use 4 configuration sets)/Off...
- Page 20 NOTE: * If registered points are more than 63 points, print “Memory Full” and stop action. Marker: Use this if user sees other points. Finder: Use this to move finder screen. UnDo: Cancel the registered point. Done: Return to previous menu. Unregist: Deleting registered pixel.
- Page 21 - D/N Threshold: Configure the threshold level for D/N mode to change (Low/Mid/High/User). NOTE: * User Mode: Difference between D>N Level and N>D Level must be more than 2 and D>N must be less than N>D. D>N: Adjust level of changing point of Day -> Night. N>D: Adjust level of changing point of Night ->...
-
Page 22: Control And Connections / Day&Night I/O Terminals
CONTROL AND CONNECTIONS OF TERMINALS UTP- UTP+ D&N D&N ALARM RS-485+ RS-485- (optional) (optional) (RX) (TX) UTP Connections/Video output (optional) ● 1 PIN: UTP- ● 2 PIN: UTP+ DAY&NIGHT I/O Terminals To select Day/Night mode using external equipment, connect connecting control lines to the appropriate terminals. -
Page 23: Lens
LENS The lens is not supplied with this camera. Purchase a lens suitable for your requirements. These cameras accept both C- and CS-mount type lenses. <Notes > *) For using main functions it is recommended to use a DC-type auto iris lens. If the lens is dirty with fingerprints other marks, the image quality might be poor. -
Page 24: Specifications
SPECIFICATIONS ITEM EVO3-FB700DNWDR ELECTRICAL Input Voltage DUAL(DC12V, AC24V) ±10% Power Consumption 3.5 Watts(300mA) Power Connector 2-Pin Terminal Block VIDEO Image Device 1/3" Sony Super-HAD II PS 960H CCD Total Pixels 1020(H) x 596(V) Effective Pixels 976(H) x 582(V) Scanning System 2:1 Interlace Sync. - Page 25 WARRANTY INFORMATION Please keep this document in a safe place. DO NOT return this document to Pacific Communications. EQUIPMENT DETAILS MODEL SERIAL NUMBER DATE OF PURCHASE IMPORTANT INFORMATION PLEASE RETAIN ALL MANUALS SUPPLIED WITH THE EQUIPMENT AND PROOF OF PURCHASE. PROOF OF PURCHASE WILL BE REQUIRED IF YOU NEED TO MAKE A WARRANTY CLAIM. Please ensure that the following instructions are followed when operating the Equipment. • This is a commercial grade product and should only be installed or serviced by a qualified technician. • Please read the Owner’s Manual before installing the device. • Never place the Equipment in a confined space (eg bookcase, built‐in cabinet) unless proper ventilation is available. It is advised to leave a 10cm space around the unit. • To prevent fire or shock hazard, do not expose the Equipment to water. Ensure that objects filled with liquid (eg vases) are not placed on or near the Equipment. • Avoid keeping or using the Equipment in a dusty, wet or electromagnetic environment. • Before making a warranty claim, ensure that you have read the “Troubleshooting” section of the Owner’s Manual. PACIFIC COMMUNICATIONS A division of Hills Holdings Limited ACN 007 573 417 Unit 10, 331 Ingles Street City Link Estate, PORT MELBOURNE VIC 3207, AUSTRALIA www.pacom.com.au ...
- Page 26 WARRANTY TERMS Pacific Communications provides consumers with the following warranty in relation to this Equipment, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business. In this warranty, we have used the following definitions: Pacific Communications, our or we means Pacific Communications, a division of Hills Holdings Limited ABN 35 007 573 417 of 159 Port Road Hindmarsh South Australia 5007. Equipment means the goods described in the table headed “Equipment Details” overleaf. Material means a material or component used by Pacific Communications in the manufacture of the Equipment. Warranty Period means 36 months from the date of purchase of the Equipment. If the Equipment or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period. (Note: HDD’s installed in equipment have a 12 month warranty period) Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Pacific Communications in order to manufacture the Equipment. Pacific Communications warrants that for the duration of the Warranty Period, the Equipment will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty. Pacific Communications undertakes that if during the Warranty Period, the Equipment, or any part of the Equipment, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Equipment or part (as the case may be) free of charge on the following terms: The consumer must retain proof of purchase of the Equipment. Pacific Communications may reject a warranty claim on Equipment where the consumer is unable to substantiate proof of purchase to the reasonable satisfaction of Pacific Communications. The consumer must contact the service provider (installer) who installed the Equipment at first instance, upon becoming aware of a defect to any Equipment. Alternatively, the consumer may contact Pacific Communications on (03) 9676 0222. Following consultation between the service provider and Pacific Communications, Pacific Communications will determine whether there is a defect, and if so Pacific Communications agrees (at Pacific Communications’ option) to repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer. If requested by Pacific Communications, the consumer must return the Equipment to Pacific Communications. The consumer will be responsible for the collection and freight costs of returning the Equipment to Pacific Communications or to any designated Pacific Communications Authorised Service Centre for repair or replacement. The consumer will also be responsible for the freight costs to deliver any new or repaired Equipment to the consumer. This warranty does not include, and Pacific Communications will not be responsible for, any costs associated with the inspection or evaluation of the Equipment, nor the removal or re‐installation of the Equipment. Please note that a service charge will apply if no fault is identified or if any fault does not fall within the conditions of this warranty. For details of the applicable service charge, please discuss this with your service provider prior to making a claim under this warranty. The consumer’s right to this warranty will cease to apply where: Security labels, identification numbers or serial numbers are tampered with or removed; The Equipment has not been used in accordance with the instructions provided in the Owner’s Manual supplied with the Equipment, or in accordance with usual use for that type of equipment; Alterations, modifications or repairs have been carried out on the Equipment (unless authorised by Pacific Communications); Upgrades (including software upgrades) are not authorised and registered by Pacific Communications. This warranty is in addition to any non‐excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar ...
- Page 28 50303578A V1.0...
Need help?
Do you have a question about the EVO3-FB700DNWDR and is the answer not in the manual?
Questions and answers