Page 3
CAMERA INSTALLATION 2. EVOHD-IDIRDN-3.6 - 2 -...
Page 4
CAMERA INSTALLATION 3. EVOHD-IDIRDN-2.812 - 3 -...
Page 5
CAMERA INSTALLATION 4. EVOHD-VDIRDN-2.812 - 4 -...
Page 6
CAMERA INSTALLATION 5. EVOHD-BIRDN-3.6 - 5 -...
Page 7
CAMERA INSTALLATION 6. EVOHD-BIRDN-2.812 - 6 -...
Page 8
1. Power : If camera power is on properly, red signal is turn on. 2. Video : Analog Video Signal Output 3. TVI : HD-TVI Signal Output 4. Power : Connect DC 12V Properly 5. RS-485 : Use RS-485 Protocol 6.
Page 9
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents General Features Precautions Safety Instructions Menu Set Up Set Up Menu Menu Set Up Lens Exposure White Bal Backlight Day&Night Image Motion System Exit Specifications Trouble Shooting - 9 -...
Page 11
Transfer Video Interface The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution of TVI picture. 3D-DNR Smart 3DNR prevents the image blurring of moving object and activates only if moving objects are appearing on the scene. Smart-IR No saturation image, vivid image in darkness! "TVI"...
Page 12
Only use the camera under conditions Severe lighting change or flicker can cause the camera to work improperly. where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. This is one of the most important parts of the It can cause malfunctions to occur.
Page 13
7KLV FDPHUD VKRXOG EH LQVWDOOHG E\ TXDOL¿HG SHUVRQQHO RQO\ 7KHUH DUH QR XVHU VHUYLFHDEOH SDUWV LQVLGH Do not disassemble this camera other than to make initial adjustments 8VH DSSURSULDWH ORZ YROWDJH SRZHU FDEOH WR SUHYHQW ¿UH RU HOHFWULFDO VKRFN 3OHDVH LQVXUH WKDW \RXU LQVWDOODWLRQ DUHD FDQ VXSSRUW WKH ZHLJKW RI WKH FDPHUD 'R QRW XVH D VWURQJ RU DEUDVLYH GHWHUJHQW ZKHQ FOHDQLQJ WKH FDPHUD 'R QRW H[SRVH WKH FDPHUD WR GLUHFW VXQOLJKW 'R QRW LQVWDOO FDPHUD LQ SODFHV ZKHUH KXPLGLW\ LV KLJK...
Page 17
Menu setting can be selected by the button inside the camera. 1. Press the set button. * The Set Up menu will be displayed on the monitor. MENU 1.LENS DCAUTO 2.EXPOSURE 3.WHITE BAL AUTO 4.BACKLIGHT 5.DNR 6.DAY&NIGHT AUTO 7.IMAGE 8.MOTION 9.SYSTEM 10.EXIT 2.
3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT.
NOTE MODE MODE INDOOR RETURN * When you select the mode setup, you can select INDOOR, OUTDOOR or DEBLUR depending on the installation environment. *On manual mode, you can select NORMAL or DEBLUR depending on the installation environment. 1. On the Set Up menu, Select EXPOSURE by using the Up or Down button. MENU 1.LENS 2.EXPOSURE...
BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20. SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/30,000. FLK : Select FLK mode if flickering occurs ;...
Page 21
AUT0 : Use this mode when the color temperature is from 2,500k to 9,500k. AWB : The function to search for the color which is matched well with the ambient environment. AWC SET : After letting camera focus on the blank white paper to the best condition of current lighting environment, press the SET button.
On this menu, backlight image can be compensated by users selecting one of modees.(HLC, BLC, WDR) 1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the left or Right button. MENU 1.LENS 2.EXPOSURE...
Page 23
BLC : This fuction is used to counterbalance the screen image by increasing the brightness so that a subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC, a submenu appears where you can make finer adjustments. - H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by changing the position &...
This fuction is used to improve the picture quality by filtering the noise which is generated under low bright light conditions. You can set different levels here. 1. Move the triangular indicator to DNR by useing the Up and Down button. 2.
Page 25
AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the low light condition. It can adjust the delay time, starting brightness and end brightness according to the ambient conditions by pressing the set button. DAY&NIGHT SMART IR IIIIIIIIIIIIIII| 20...
- EXTERN S/W [LOW/HIGH] : Set the external signal for switching between COLOR and B/W. - DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W . When selecting, the following submenu will appear. MENU 1.LENS 2.EXPOSURE 3.WHITE BAL AUTO 4.BACKLIGHT...
Page 27
- D-ZOOM : You can use the digital zoom with x1~x8 magnification. The higher the digital zoom magnification is, the lower the resolution is. - ACE [LOW/MIDDLE/HIGH] : Intelligent light level control to over come even strong backlight conditions. - DEFOG [ON, OFF] : This fuction helps to recognize the object in a dusty weather condition. ON, a submenu appears where you can make finer adjustments.
This function is used to detect moving objects in the monitored area. When choosing ON, the following submenu will appear where you can adjust the settings for the MOTION function. MENU 1.LENS 2.EXPOSURE 3.WHITE BAL AUTO 4.BACKLIGHT 5.DNR 6.DAY&NIGHT AUTO 7.IMAGE 8.MOTION 9.SYSTEM...
This can be used when you want to select the additional function control. 1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button. 2. Select one of the mode using the Up and Down button. MENU 1.LENS 2.EXPOSURE 3.WHITE BAL...
Press the Set button in the exit menu to save the current settings and exit the Set Up menu. - 29 -...
Page 31
MODEL EVOHD-FBDN Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination 0.001 Lux @ F1.2 , (Sens-UP X32) Video Output 1.0Vp-p Composite.
Page 32
MODEL EVOHD-IDIRDN-3.6 Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination COLOR : 0.3 Lux @ F1.2, B/W : 0 Lux (IR LED ON) IR LED 18EA Video Output...
Page 33
MODEL EVOHD-IDIRDN-2.812 Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination COLOR : 0.9 Lux @ F1.8 IR LED B/W : 0 Lux (IR LED ON) Video Output...
Page 34
MODEL EVOHD-VDIRDN-2.812 Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination COLOR : 0.9 Lux @ F1.8, B/W : 0 Lux (IR LED ON) IR LED 28EA Video Output...
Page 35
MODEL EVOHD-BIRDN-3.6 Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination COLOR : 0.9 Lux @ F1.8, B/W : 0 Lux (IR LED ON) IR LED 24EA Video Output...
Page 36
MODEL EVOHD-BIRDN-2.812 Sensor type 1/2.8" SONY 2Mega Exmor CMOS Sensor Effective pixels 1984(H) X 1105(V), 2.19M Pixels Total pixels 2000(H) X 1121(V), 2.24M Pixels Resolution 1920X1080(1080p@30f / 1080p@25f) Scanning system Progressive Scan Min. illumination COLOR : 0.9 Lux @ F1.8, B/W : 0 Lux (IR LED ON) IR LED 42EA Video Output...
Page 40
Proudly distributed by Visit "http://www.hills.com.au/branches" to find your nearest Hills office, or contact us at 1800 685 487 for more information.
Need help?
Do you have a question about the EVOHD-FBDN and is the answer not in the manual?
Questions and answers