D-Sub Cable; Dvi Cable - Philips 150B6CB/00 Service Manual

GENERAL PRODUCT SPECIFICATION(Continued)
3). Audio
Input signal: 500mVrms
Loudspeaker (Impedance: 16 Ohm +/-15%): 2W+2W stereo for RMS Power
Frequency range: 320Hz - 13KHz
Headphone connection will mute speakers
4). USB Adaptor
Input signal: Upstream input (V
Output signal: Downstream output (V
Interface
3.2

3.2.1 D-Sub Cable

Length.
Connector type.
Pin Assignment:
PIN No.

3.2.2 DVI Cable

The input signals are applied to the display through DVI-D cable.
Length.
Connector type.
Pin Assignment:
17 inch LCD Monitor
TYPE
BRAND : PHILIPS
2004-12-24
Peter V.
, D+, D-, GND) via USB-B receptacle.
BUS
, D+, D-, GND) through USB-A receptacle
BUS
: 1.5 M +/- 50 mm
: D-Sub male with DDC-2B pin assignments.
Blue connector thumb-operated jackscrews
SIGNAL
1 Red video input
Green video input / sync on green
2
Blue video input
3
4 GND
5 GND- Cable detect
Red video GND
6
7 Green video GND
8 Blue video GND
9 DDC +3.3V or +5V
10 Logic GND
11 GND
Serial data line (SDA)
12
13 H-sync / H+V
14 V-sync
Data clock line (SCL)
15
: 1.8 M +/- 50 mm
: DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
:170B6CG/00
2004-12-24
8639 000 16159
590
20 5
170B6 LCD 77
Go to cover page