The LFU update command updates option adapter firmware, as shown in the
following example:
UPD>update fwb0
Confirm update on:
fwb0
[Y/(N)]y
WARNING: Updates may take several minutes to complete for
each device.
fwb0
Updating to 3.10...
UPD>
5. As shown in the previous example, when the firmware finishes loading into ROM, the
UPD> prompt is displayed. Enter exit to leave the LFU and to reset the system and
use the updated firmware.
AlphaPC LFU Commands
This section describes the following AlphaPC LFU commands:
•
save_nvram
•
restore_nvram
DO NOT ABORT!
Verifying 3.10...
PASSED.
5