Continuous Drainage - Sinclair CFO-45E Operation Manual

Drainage
While the water tank is full, the compressor will stop for self-protection and:
water full indicator will turn into red.
The water full indicator
The unit will buzz. * For stopping the buzz, you may press the ON/OFF button to turn off the unit
To move the water tank, pull it out squarely from the unit by using the handle at the water tank. (FIG.1)
After empting the water tank, place the water tank into space. Make sure it is properly positioned, in order for the
'water full' sign to go out and your dehumidifier is operating. (FIG.2)
Please note, i n case, the water tank has not been positioned well, the water full indicator will turn into red.
To move the water tank,
pull it out squarely from
the unit by using the
handle at the water tank.

Continuous drainage

When the dehumidifier is operated at very high humidity levels, the water tank will require more frequent drainage. In
this situation, it may be more convenient to set the unit up for continuous drainage with the following procedures:
1. Connect the drain hole with a water tube of inner diameter 12mm. (FIG.3) * Please note the water tube is not
supplied with the unit.
2. Ensure the water will always drain away freely and the tube will remain in right place.
* Note! In very cold weather conditions, precautions should be taken to prevent the water tube from freeing.
will turn into red.
FIG. 1
As the water tank is
full or has not been
positioned well, the
water level window
will turn into red.
FIG.3
6
FIG.2