Operation - Sinclair CFO-45E Operation Manual

Operation

Control panel
1. Humidity selection button
2. Speed (ventilation) button
3. Display window
4. Temperature display button
5. ON/OFF button
6. Humidity indicator
7. High speed indicator
Operation
1. Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of the unit.)
2. Press button ON/OFF to turn on the unit. The compressor will start to work in continuous mode. (Ionizer
(optional) will start running automatically.)
3. Press button HUMI to set the room humidity you need: continuous de-humidifying , 40%, 50%, 60% or
70%. (When the room humidity is under 35%, the display will show 'LO' and if the room humidity is over
95%, it will show 'HI'.)
4. Press the speed button to choose the ventilation speed, high or low.
5. Press the temperature button to display the room temperature. It will revert to display the room humidity
after 12 seconds.
6. Press the timer button to set up the time for turn on/turn off (1~24hr). The unit will be continuous
de-humidifying without timer setting.
7. To turn off the unit, press button ON/OFF again.
8. Low speed indicator
9. Timer
10. Water full indicator
11. ON/OFF indicator
5