Windows Xp Wireless Zero Configuration - Linksys WPC51AB User Manual

2. Windows will notify you that the driver has not passed Windows Logo test-
ing. This is normal, and it has been verified that the Adapter does work with
Windows XP. Click the Continue Anyway button.
3. When Windows has finished installing the driver, click the Finish button.
You have now completed the driver installation for
the Adapter. To configure the Adapter, proceed to the next section,

"Windows XP Wireless Zero Configuration."

12
Instant Wireless
Figure 6-2
Figure 6-3
Series Dual-Band Wireless A+B Notebook Adapter
®
Windows XP Wireless Zero Configuration
1. After installing the Adapter, the
Windows
Configuration icon will appear in
your computer's system tray (see
Figure 6-4). Double-click the icon.
2. The screen that appears will
show any available wireless
network. Select the network
you want.
If this network has WEP
encryption enabled, go to
step 3. If this network does
not have WEP encryption
enabled, then the screen in
Figure 6-5 will appear.
Check the box next to Allow
me to connect to the select-
ed wireless network, even
though it is not secure. Then
click the Connect button
and go to step 4.
For Windows XP users: Windows XP has a built-in configuration tool.
Use Windows XP Wireless Zero Configuration (in the system tray at
the bottom of your screen) to configure the Adapter.
XP Wireless Zero
Note: In Steps 2 and 3, these are the instructions and screenshots for
Windows XP with Service Pack 1 installed. If you have not installed
Service Pack 1, select the network you want, and click the Connect
button. If the network has WEP encryption enabled, enter the WEP
key in the Network key field, and then click the Connect button.
Figure 6-4
Figure 6-5
13