Yamaha Reface CS Owner's Manual page 29

!0 [STORE] button
For displaying the Store Settings screen. On
this screen, you can specify where to store set-
tings and store them with a name. When you
store a Voice, it overwrites the Preset Voice
stored in the selected location. If you wish to
restore Preset Voices, do a Voice Recall (page
22) or a Factory Reset (page 22 or 40).
When you press this button, the Store screen
will be displayed.

Store screen
Switches to the Store Name
name
screen.
Sets where to store the cur-
rent Voice.
Bank
NOTE
1-1 to
The [BANK] button and
4-8
buttons [1]–[8] can also be
used to make this setting.
Used if you wish to listen to
the Voice at the location
selected for storing.
STORE
Tap the switch to toggle
TO
between
CHECK
keyboard, you will hear the
Voice selected for storing.
keyboard, you will hear the
Voice stored at the location
selected by using "STORE
TO BANK."
and .
: When you play the
: When you play the
Functions of Front Panel Components
Used to store Voices. When
you tap the switch, a confir-
mation message will be dis-
played on-screen.
STORE
Tap the "YES" switch to
store the Voice. Tap the
"NO" switch to return to the
Store screen without storing
any data.

Store Name screen
store

Upper- and
lower-case
ABC
letters and
symbols

!1 [ LOOPER] button
For displaying the Phrase Looper screen. On
this screen, you can operate the MIDI looper,
recording, overdubbing, and playing back
loop phrases. By using this section, phrases
containing a maximum of 2,000 notes or ten
minutes at 120 BPM can be temporarily
recorded.
reface CS/DX/CP/YC Owner's Manual
Switches back to the
Store screen.
Moves the cursor to the
left.
Tap the switch to display
the Name Input screen.
On this screen, you can
input a new Voice name
by flicking and tapping
the slider to select let-
ters and symbols.
Moves the cursor to the
right.
23