Linksys WDT11 User Manual page 12

14. After setting the Properties fields, Windows NT will begin installing the
network components you previously selected. You may be asked if you
would like to configure the protocols with a DHCP server on your network.
If this screen comes up, check with your Network Administrator before
clicking the Yes or No button to continue.
15. After the network component installation is complete, the following screen
may appear. Click the Next button to continue.
16. At this point, Windows NT will let you know that it is ready to start the net-
work. If you wish to make any corrections, click the Back button. To con-
tinue, click the Next button.
16
Instant Wireless Series
TM
PCI Adapter
17. Verify that the correct information is presented on this screen, which will
appear next. To make any corrections, click the Back button. To continue,
click the Next button.
8. Windows NT has now completed installing the network. Click the Finish
button to continue and then restart your computer. Once your computer has
restarted, you can continue on to the Configuration Utility section.
NOTE: After you have installed the PCI Adapter, reapply the
Windows NT service pack.
17