Honda 2003 Insight Owner's Manual page 223

Changing a Flat Tire
HUB
8. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully, it may be hot from
driving.
220
Taking Care of the Unexpected
9. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
10. Lower the car to the ground and
remove the jack.