PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Set the Stand Base on even floor.
Assemble the parts of the Stand Body
with the Stand Base of the TV.
M4x14
3
Assemble the parts of the Cable
Management Clip
Cable
Management
Clip
A-4
(only 50PK7***, 50PK9***)
Stand Body
Stand Base
with the Stand Body.
Stand Body
4
Assemble the TV as shown.
5
Fix the 4 bolts securely using the holes in
the back of the TV.
M4x28