CONNECTING WITH AN RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN socket on the TV.
Connect the antenna cable to the ANT IN
2
socket of the VCR.
Press the PLAY button on the VCR and match
3
the appropriate channel between the TV and
VCR for viewing.
CONNECTING WITH AN RCA CABLE
Connect the AUDIO/VIDEO jacks between TV
1
and VCR or external equipment. Match the
jack colours. (Video = yellow, Audio Left =
white, and Audio Right = red)
Insert a video tape into the VCR and press
2
PLAY on the VCR. ( Refer to the VCR owner's
manual. )
Or, Operate the corresponding external equip-
ment. (Refer to external equipment operating
guide.)
Select AV1, AV2 input source using the INPUT
3
button on the remote control.
NOTE
► If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
O
3
2
LAN
1
O
AUDIO
R R R R R
2
ANTENNA
1
IN
1
DIO
Camcorder
Wall Jack
2
Antenna
1
or
Video Game Set
5