Table Of Contents - Kenwood KRF-X9080D Service Manual

KRF-X9080D/VR-8070/8060
QQ
3 7 63 1515 0
CONTENTS / ACCESSORIES / CAUTIONS
CONTENTS
CONTENTS / ACCESSORIES / CAUTIONS...............2
EXTERNAL VIEW ........................................................3
ADJUSTMENT .............................................................4
INTERCONNECTION DIAGRAM ................................5
PC BOARD ..................................................................7
ACCESSORIES
FM indoor antenna (1)
U.S.A. and Canada
(T90-0905-05)
Remote control unit (1)
(See the below table)
TE
REMOTE CONTROL vs MODEL
L 13942296513
MODEL PARTS #
VR-8070
A70-1659-05 RC-R0827
VR-8070-S
KRF-X9080D
A70-1620-05 RC-R0820
KRF-X9080D-S
KRF-X9080D
A70-1621-05 RC-R0821
KRF-X9080D-S
VR-8060-S A70-1622-05 RC-R0822
CAUTIONS
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If
this happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
Please note that resetting the microcomputer will clear the contents
of the memory and return the unit to the state it was in when it left
the factory.
For the U.S.A. and Canada
Unplug the power cord from the wall outlet, then plug
it back in while holding down the POWER ON/STANDBY
www
key.
For other countries
With the power cord plugged in, turn the POWER ON/
OFF key OFF. Then, while holding down the ON/STANDBY
key, press POWER ON/OFF key.
2
Other countries
(T90-0877-05)
REMOTE CONTROL # DESTINATION
x ao
y
. i
8
SCHEMATIC DIAGRAM ............................................21
EXPLODED VIEW .....................................................42
PARTS LIST...............................................................44
SPECIFICATIONS .....................................................59
AM loop antenna (1)
(T90-0852-05)
Batteries (R6/AA) (2)
Q Q
3 6 7 1 3
K1P1
K2P2
Y1
X1
E1
E2
K3P3
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
Power mode
Input selector settings
Picture output
Speaker ON/OFF
Volume level
BASS, TREBLE, INPUT level
TONE ON/OFF
LOUDNESS ON/OFF
Dimmer level
MD/TAPE settings
Listen mode setting
u163
.
2 9 9 4 2 8
AC plug adapter (1)
(E03-0508-00)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
1 5 0 5 8 2 9 9 4
Speaker settings
Distance setting
Input mode setting
Sound mode settings
Broadcast band
Frequency setting
Preset stations
Tuning mode
ACTIVE EQ mode
SPEAKER EQ mode
m
co
9 9
2 8 9 9