Bluetooth Operation - Boss Audio Systems MC600B User Manual

5
BLUETOOTH® OPERATION
Pairing & Connection
1) Power on the MC600B
a. Press and Hold the MFB for 3 sec.
2) The MC600B will automatically go into pairing mode.
The blue and red LEOs will flash alternately
a. Go into the Settings menu on your device
b. Enter the Bluetooth Menu
c. "MC600B" will display under devices to pair.
d. If prompted to enter a pass code: "0000"
e. If the unit is not seen, repeat the above steps to
refresh the
11
Device List"
3) If the connection is successful, you should now be paired and
connected to the MC600B
Reconnection
1)
Power on the MC600B.
2) The unit will reconnect to the last paired device.
3) If you have paired with the MC600B, but it wasn't the last
paired device ...
a. Enter the Bluetooth Menu on your device
b. "MC600B" will display under
11
Paired Devices"
c. Choose the "MC600B" to reconnect.
4)
If the user is out of range from the MC600B, it will disconnect
automatically ...
a. To reconnect once device is back in range, press the
11
MFB" button once.
b. The MC600B will reconnect to the device.