Inserting/Removing Battery - Hyundai HY2155 User Manual

18v combi (hammer) drill
Table of Contents

Advertisement

4.9. After charging is complete, the GREEN LED on the charger will come ON and the RED light will go
OFF,
4.10.
The battery pack will fully charge if left on the charger, but it will not overcharge.
Led Indicator
5. INSERTING / REMOVING BATTERY PACK
5.1. Inserting/removing battery pack.
5.1.1. Insert battery cartridge, align the tongue on the battery cartridge with the groove in the
housing and slip it into place. Insert it all the way until it locks in place with a click. If you can
see the red indicator on the upper side of the button, it is not locked completely.
5.1.2. To remove battery press battery unlock button (1) and slide in direction of arrow (2).
5.2. Battery protection system.
Battery Pack
Hot/Cold battery
Defective
Charging
Fully charged
Always switch off the tool before installing or removing of the battery cartridge. To
remove the battery cartridge, slide it from the tool while sliding the button on the
front of the cartridge. Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall out of the tool, causing
injury to you or someone around you. Do not use force when installing the battery
cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
Red Led
Flashing
Flashing
ON
OFF
Green Led
Flashing
OFF
Flashing
ON
Action
Charging will
begin when
battery returns to
5°C-40°C
Battery pack or
charger is
defective
Charging
Charging is
complete
Maintenance
charging
Page 7

Advertisement

Table of Contents
loading

Table of Contents