Adjusting The More Picture Settings - Vizio D24h-C1 User Manual

Adjusting the More Picture Settings

To adjust the More Picture settings:
1. From the PICTURE menu, use the
Arrow buttons on the remote to
highlight More Picture and press
OK. The MORE PICTURE menu is
displayed.
2. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow buttons to
change
the setting:
• Color Temperature -
See Adjusting the Color
Temperature on page 24.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Backlight Control -
Dynamically improves the
contrast ratio of the picture
by adjusting the backlight.
Select On or Off.
• Reduce Signal Noise - Reduces background picture noise
when viewing analog sources. The function helps to correct
"speckle" noise with a slight reduction in sharpness. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion for
mpeg files. Select Off, Low, Medium, or High.
• Game Low Latency - Reduces video delay (lag) when
gaming. Select On or Off. This option is not available for
devices connected using a coaxial cable.
VIZIO
MORE PICTURE
Color Temperature
Black Detail Off
Backlight Control On
Reduce Signal Noise Low
Reduce Block Noise Low
Game Low Latency
Picture Size & Position
Film Mode Auto
Gamma
23
• Picture Size & Position - Picture Size increases or
decreases the vertical and horizontal size of the displayed
picture. Picture Position adjusts the vertical and horizontal
positions of the picture to ensure the image is centered
and completely fills the screen. Use the Left/Right Arrow
buttons to adjust the horizontal position of the displayed
picture. Use the Up/Down Arrow buttons to adjust the
Wide Zoom Normal Panoramic
vertical position of the displayed picture. Press the OK
button when you are finished.
• Film Mode - Optimizes the picture for watching film. Select
Exit 2D 3D
Auto or Off.
• Gamma - Sets the shape of the gamma curve. Use lower
ABC
values for bright room conditions and higher values when it
is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
Input Wide CC
3. When you have finished adjusting the More Picture Settings, press
the EXIT button on the remote.
Sleep
Picture Audio
Timer
Network Settings Help
5