Page 1
User Manual Mini Projector PP71 Thank you for your purchase of this Magnasonic product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference. magnasonic.com/support...
CONTENTS COMPONENTS OF PROJECTOR ..........3 SPECIFICATION................4 CHARGING THE PROJECTOR ..........4 SET UP ................... 5 POWERING UP AND VIEWING MEDIA ......... 5 ADJUSTING VOLUME ..............6 ADJUSTING FOCUS ..............6 CHARGING YOUR DEVICE WITH THE PROJECTOR .... 6 IMPORTANT SAFETY INSTRUCTIONS ........
COMPONENTS OF PROJECTOR 3.5mm earphone jack Standard USB port 5V for charging output HDMI and MHL signal input port DC 12V/1.5A power input Power switch Touch- sensitive Volume up Touch- sensitive Volume down Touch- sensitive Mode Optical Lens 10. Focusing wheel 11.
SET UP • Connect one end of the AC adapter to the Projector 12V port and plug the other end into an electrical outlet. • Connect the HDMI cable (included) to the HDMI port and the other end to your device or connect the MHL cable to the projector HDMI port and the other end to your device (e.g.
Note: If you are using one of the following device’s, you will see your device’s screen displaying on the wall. • iPad (3rd generation) • Apple laptops with display port to HDMI adapter. • iPad2 • PC laptop with type A HDMI port ADJUSTING VOLUME Touch Mode area first to highlight.
IMPORTANT SAFETY INSTRUCTIONS All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. If damage is caused by failure to follow the instructions, the warranty does not apply. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.THERE ARE NO SERVICEABLE PARTS INSIDE.
SAVE THESE INSTRUCTIONS! DANGER To reduce the risk of electric shock, burns, fire or injury: Do not use while bathing or in a shower. Do not place or store unit where it can fall or be pulled into a tub or sink.
Page 9
Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. Do not overload electrical outlet. Use only the power source as indicated.
TROUBLESHOOTING Q. The Projector will not show the video on the wall. A. Recharge your device’s battery. Also, check to see if the HDMI cable is fully inserted into the Projector and your device. Q. The video showing on my wall is blurry. A.