Engine Mounting - GREAT VIGOR Dominator XP User Manual

Step 31

Engine Mounting

31A - Grub Screw w/Threadlock 4x4mm -- 1 31B - Button Head Screw w/Threadlock 5x10mm -- 4
Step 30
!
Make sure you can still slide
your engine, then please lnsert a
sheet of notebook paper to set
the clutch bell pinions with the
main gear mesh. The correct gear
soacing is when the pinion is
close to the main gear, but if you
hold the clutch bell, you should
still be able to rock the main gear
31A
back and forth slightly with light
pressure. Roll the gears and
check the mesh in several
different locations on the main
gear. Then, tighten the four
button head machine screws.
Step 26
31B