Advertisement
FREESTYLE SCOOTER
OWNER'S MANUAL
FOR USE WITH THE FOLLOWING PULSE PERFORMANCE PRODUCTS™ SCOOTERS
•
KRUSHER
DO NOT RETURN TO STORE! QUESTIONS OR COMMENTS?
CALL (866)-434-6067
NOTE: Manual illustrations are for reference purposes only. Illustrations may not reflect the exact appearance of the actual product.
Specifications are subject to change without notice.
06.18.13
Advertisement
Table of Contents
Related Manuals for Pulse Perfomance Products Krusher
Summary of Contents for Pulse Perfomance Products Krusher
- Page 1 OWNER’S MANUAL FOR USE WITH THE FOLLOWING PULSE PERFORMANCE PRODUCTS™ SCOOTERS • KRUSHER DO NOT RETURN TO STORE! QUESTIONS OR COMMENTS? CALL (866)-434-6067 NOTE: Manual illustrations are for reference purposes only. Illustrations may not reflect the exact appearance of the actual product.
-
Page 2: Table Of Contents
Table of Contents Safety and Warnings Before You Start Set Up and Usage Instructions Check Before Riding Safety Tips Warranty NOTE: Read and understand this entire manual before allowing a child to use this product. DO NOT RETURN TO STORE. Questions or comments? Call 1-866-434-6067. - Page 3 Replace all worn or broken parts immediately. • • Ride only on flat, dry surfaces such as pavement or level ground without loose debris, such as sand, leaves, rocks or gravel. To help reduce the risk of injury, adult supervision is recommended. •...
-
Page 4: Before You Start
Before You Start Remove contents from box and remove any packaging that protect the components from damage during shipping. Inspect the contents of the box to ensure that all components are included and are undamaged. • Grip • Handlebar T-bar / Stem tube •... -
Page 5: Ages
Handlebar Grip T-bar / Stem tube Rear fender brake Fork headset lock nut Down tube Stem tube clamp Deck Front fork Wheels and bearings Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067. -
Page 6: Set Up And Usage Instructions
Set Up and Usage Instructions 1. Loosen the stem tube clamp bolts with the 5mm hex wrench and push the stem tube onto the fork until it bottoms out onto the fork headset lock nut. 2. With the front wheel pointed straight forward, the handlebars should be square to the front wheel; tighten the stem tube clamp bolts evenly and securely. -
Page 7: Safety Tips
bolts for proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Pulse Performance Products™ wheels. Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Pulse Performance Products™... -
Page 8: Warranty
Warranty The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from the date of purchase. This Limited Warranty does not cover normal wear and tear or any damage, failure or loss caused by improper assembly, main- tenance, or storage.
Need help?
Do you have a question about the Krusher and is the answer not in the manual?
Questions and answers