Hooking Up Audio Jack; Year Limited Warranty - Jam Transit City HX-HP150 User Manual And Warranty Information

BLUETOOTH CONNECTION, CONTINUED
®
4. Look for Jam Transit City Headphone in your device's Bluetooth
list or click YES.
5. Now hit PLAY on your headphones and crank it up—or down if
you're lame.
The device and Bluetooth will find each other every time, just as long
as the headphones are set to Bluetooth and your device's Bluetooth
is, you know—on.
If you're connecting to a computer, you may have some extra steps
on that end. You'll have to get that information from the computer
company.
Depending on your device you may be prompted to enter a pairing
code. If prompted, enter "0000" as the code.
To disable pairing of existing device and pair a new device, press
and hold the + and - buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Transit City Headphones but haven't
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.
HOOKING UP OLD SCHOOL AUDIO, JACK
1. Plug one end of the cord into the headphones
and the other into the headphone jack on
your device.
2. Turn on the headphones.
3. Hit PLAY on your device and crank it up - or
down if you're lame.
You'll have to play and pause the music from
your device, not your headphones. No
problem. You're there anyway, right?
LOOK MA, NO HANDS!
When friends call to inturrupt your party of one—and you know they will—answer the phone without disconnecting from your JAM
Transit City. Yes, that's right. Your headphones have hands-free calling, too. How amazing is that? Here's how it works:
1. Make sure your phone and headphones are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Transit City.
3. If you'd rather not talk, hold down the PLAY/PAUSE button on your Transit City for 3 seconds to ignore the call.
THE COOLEST PART: The Transit City knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off—and so does the party. If it's you making the call, just start dialing from your phone, and the Transit City
automatically does its hands-free thing. Isn't it refreshing to know your headphones totally get you?
NOTE: If your Transit City is connected to a smart phone, you can talk to Siri
PLAY/PAUSE button and voilà!
Check out the chart below for a complete guide on handling calls with your Transit City.
Situation
1 Incoming call
st
On call
2 Incoming call
nd
Both calls active

1 YEAR LIMITED WARRANTY

For detailed Warranty Instructions and Information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: http://canada.jamaudio.com/warranty-1yr
Short Press Play/Pause Button
Pick-Up call
End call
Call 1 on Hold, Pick-Up call 2
Hang up call 1, switch to call 2
To obtain warranty service on your Jam product, contact a
Consumer Relations Representative by telephone or email for
assistance (You can find their contact info on page 1). Please
make sure to have the model number of the product available.
Bluetooth
on
®
Devices
>
Jam Transit City
COMING CLEAN
A soft, dry towel is all you need to
clean off your headphones. Using
water, harsh cleaners, or anything else
only starts messing with the mechanics
inside. So, yeah, don't do it.
(or any other voice control assistant). Just hold down the
®
Long Press Play/Pause Button
Reject call
Move call from headpones to device
Reject call 2
Switch between call 1 and call 2
2m 15m