Jam Transit Touch HX-HP910 User Manual And Warranty Information

USER GUIDE AND

WARRANTY INFORMATION

HEY THERE!
Thank you for purchasing
the JAM Transit Touch.
Check out the sections
below for all the
important information
about your new
headphones.
JUST CHARGE IT
Charging the headphones is so easy you've probably figured it out by now, but just in case, you've got two options: you can charge
them using your computer or a wall outlet. The Transit Touch needs about 3 hours for up to 12 hours of party time.
1. The cord that came with the headphones —
the one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you'll need
to pick up a power cord with a micro USB the
next time you're at the store, or use any USB AC
adapter, including the one for your cell phone.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR HEADPHONES
1. This is the power button. It also lets you know what
your headphones are up to (see chart below for details)
2. The power cord goes here
3. Aux-in port to hook it up old-school
4. Touchpad — swipe or tap to control your headphones
5. Swipe clockwise to crank the music up
6. Swipe counter-clockwise to turn the music down
7. Tap to play, tap again to pause
8. Swipe forward or up to jam on to the next track
9. Swipe back or down to move to the previous track
SHED SOME LIGHT
The LED light on your headphones lets
you know what they're doing.
Low Battery
Powering On
Pairing Mode
Charging
Connected
Ready to Party
WE'RE HERE TO HELP. CONTACT US!
You've got questions? We've got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It's HX-HP910)
Register your headphones! Information about where
you bought them and how you're using them is like
gold for the people who make these headphones.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: canada.jamaudio.com/product-registration
1
3
2
BLUETOOTH CONNECTION — IT'S A SETUP
®
Like any amazing couple, this one starts with a
connection — one between your device and the
headphones' Bluetooth. Here's how it works:
1. Make sure the smartphone, tablet, or
computer you're using with the headphones
has Bluetooth.
2. Turn on the headphones (press and hold the
power button for 3 seconds) and look for the
little blinking light.
Continued on page 2.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
3h
AC adapter not included.
5 6
4
8 9
HX-HP910
or
7
3s