Table of Contents
Advertisement
Source
(V)
Start ComproDTV 4 and watch TV
After installation, just press the power button of the remote or double click the
ComproDTV 4 icon on the desktop you will be able to watch TV. Same as
operating a normal TV set. Watch TV programs on your PC, in full-screen
mode or in a window. Channel up and down. Close ComproDTV 4 and even
shutdown the computer with the full function remote control keypad.
Options
Press the Options
detail settings of ComproDTV 4 here.
TV Settings
This option gives you the way to manually set the method of scanning TV
programs. Select your choice here or use default channel table to do the
scanning.
Autoscan
The first time you start ComproDTV 4, Autoscan will automatically scan for
available TV channels for TV signals. Please select your TV source from
analog cable/antenna. You can rescan the channels at any time by pressing
the Autoscan button.
When Autoscan is finished, detected channels are automatically enabled and
marked with the green check mark
not be detected, are disabled and marked with a blank. However, you can
interrupt the scanning process by pressing the Stop button.
Language Selection
For Audio (Q)
Screen Ratio Switch
(tab)
button to open the Options dialog box. You can change
HotKey
Enable/Disable Always-on-Top function
A
for TV window.(Oregon circle on the
upper-right corner of the TV window)
L
Sleep function
F7
Video Desktop
F8
Open snapshot dialog box
Note: Language select is only available while the
program supports it.
. Channels, where a valid signal could
Description
21
Advertisement
Table of Contents
