Download Print this page

OEM PS-12 Owner's Manual page 10

300 watt powered subwoofer
Hide thumbs Also See for PS-12:

Advertisement

S E T U P (continued)
Fine Tuning the Controls
Crossover Switch
If you choose to bypass the internal crossover and use an external crossover, such as those located in most
modern receivers and processors, then you will need to fine tune the system based on the adjustments
provided by the manufacturer of your electronics in conjunction with the Level and Phase controls on the
PS-12. Note, the Level and Phase adjustments on the PS-12 are not bypassed and will still function as
indicated above.
To bypass the internal crossover, move the Crossover switch
now pass signals up to approximately 300Hz.
Auto Power Mode Switch
The PS-12 contains a circuit that automatically powers up the amplifier when a signal is detected. The
same circuit also places the PS-12 into standby mode when no signal has been detected for a period of
approximately 10 minutes. This signal sensing circuit can be bypassed by switching the Auto switch
the OFF position if it is preferable to control the PS-12's power with a remotely operated power source.
S P E C I F I C A T I O N S
Frequency Response:
Crossover Frequency:
Phase Adjustment:
Amplifier Output Power:
Audio Inputs:
Input Impedance:
Input Power:
Input Power Connection:
Power (Mains) Fuse:
Power Modes:
Auto Off Delay:
Dimensions:
Weight:
Shipping Dimensions:
Shipping Weight:
PS-12
O W N E R ' S M A N U A L
(continued)
28Hz – 300Hz (System Response)
40Hz – 120Hz (Low-pass filter with bypass switch)
0 – 180 degrees (Continuously variable)
300 watts, with thermal and clipping limiters
Summing stereo line level (RCA x2)
LFE (RCA shared with Left input connector)
Speaker level (Stereo 5-way binding post)
Line Level – 20k ohms, Unbalanced
Speaker Level – 220 ohms
120V 60Hz AC
IEC 2-wire receptacle with integral fuse holder
3.15A 250V T3.15AL (5x20mm) style Slow Blow
Auto signal sensing and always on
~10 minutes
15-3/8"W x 17-5/16"H x 14-3/4"D, (390W x 440H x 375D)mm (without feet)
43lbs (19.5kg)
21"W x 20"H x 20"D, (533W x 508H x 508D)mm
51lbs (23.2kg)
to the Bypass position. The subwoofer will
6
to
2
10

Advertisement

loading