Download Print this page

Ideeo HT0960 Instructions For Use Manual

Hide thumbs Also See for HT0960:

Download this manual

Instructions for use

Hair dryer

Page 1 Instructions for use Hair dryer...
Page 3: Hair Dryer
Hair dryer Connection to the mains supply The hair dryer should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label of the hair dryer. This product complies with all binding CE labelling directives.
Page 4 air intake. ✦ A blockage in the air-fl ow system may cause the integral thermal safety cut- out to switch off the appliance. Should this occur, immediately disconnect the appliance from the mains power and allow suffi cient time for it to cool down before the blockage is removed and the appliance is switched on again.
Page 5 Styling nozzle The styling nozzle can be fi tted to the air outlet to facilitate shaping the hair during blow drying. Volume diffusor The volume diff usor is also fi tted to the air outlet. The volume diff usor is used to maintain the volume of the hair. Move the diff usor with a slightly circular motion over the head.
Page 6 for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modifi ed, repaired or interfered with by any unauthorised person, or damaged through misuse.