secureView SV- 6912.IR Installation Instructions

Hanging style rear view camera with night vision

The SV-6912.IR is a hanging style Rear View Camera with Night Vision. It can be mounted up

high on the back of the vehicle which makes it perfect for bigger vehicles such as Semi Trucks,

Motor Homes, Trailers, and Vans. It can also be mounted down low on the vehicle, either on

the bumper or under a license plate bezel if there is adequate space.

FEATURES:

• Hanging style CCD color camera

• 120° Viewing Angle

• Equipped with Infra Red LED for Night Vision

• Can be mounted high or low on the vehicle depending on owner's preference

• Optional Audio Input. Perfect for hooking up to a DVR system

• Perfect for Semi Trucks, Motor Homes, Buses, or Vans

• Parking assist lines to help driver accurately judge distance behind the vehicle

• Durable Zinc Alloy Die Cast Body

• Reverse Image only

• Provides extra security when backing-up

• Works perfectly with any SecurView™ or aftermarket monitor

• Waterproof Camera Design (IP68)

INSTALLATION INSTRUCTIONS:

SV- 6912.IR

Hanging Style Rear View

Camera with Night

Vision

Table of Contents

Need help?

Do you have a question about the SV- 6912.IR and is the answer not in the manual?

Page 1 SV- 6912.IR Hanging Style Rear View Camera with Night Vision INSTALLATION INSTRUCTIONS: The SV-6912.IR is a hanging style Rear View Camera with Night Vision. It can be mounted up high on the back of the vehicle which makes it perfect for bigger vehicles such as Semi Trucks, Motor Homes, Trailers, and Vans.
Page 2 INSTALLATION INSTALLATION PRECAUTIONS: 1. The Securview™ SV-6912.IR is designed to be mounted up high on the vehicle. Make sure there will be adequate space to mount the camera. 2. Make sure to double check that the camera will not be blocking any brake lights or turn signals on the vehicle.
Page 3 WIRING: 1. Carefully choose a hidden out-of-sight location for drilling the cable hole. Some vehicles may have an existing hidden rubber grommet or plug available to avoid having to drill into the body. Be sure to double-check for any wiring or obstructions behind the surface where you are going to drill the cable hole.
Page 4 SPECIFICATIONS: 1/4 Color CMOS Sensor Video Output: 1.0 V P-P composite (75 Ohm load) Dimension (In.): 2¼"(L) × 2⅛"(W) × 2⅛"(D) Supply Voltage: +12VDC Power Consumption: 200mA with Night Vision Weight: 20 Oz. Electronic Shutter: 1/50(1/60) s – 1/100000s Pixels: NTSC: 648 (H) × 492 (V) White Balance: Automatic PAL: 648 (H) ×...