secureView OEM-6309 Installation Instructions

Wide-angle

Download this manual

The OEM-6309 is a special designed OEM camera with a custom snap-in style mounting

bracket that allows it to be easily mounted to the vehicle. It is designed to be custom mounted

on the license plate bezel for the Toyota Camry 2009-2011 vehicles with minimal installation

time and with no special tools required for the job. Once installed, the camera looks completely

factory and is easy to keep out of sight.

FEATURES:

• Custom design allows it to be mounted in the factory camera location.

• The 170° ultra wide-angle

• Easily snaps into place on the vehicle

• Parking assist lines to help the driver accurately judge distance behind the vehicle

• Constructed of high-grade plastic

• Reverse image

• The OEM cam easily connects with other SecurView products such as any of the LCD

monitors. It can also be integrated with your existing OEM or aftermarket LCD/TFT

displays.

• The Securview™ OEM-6309 is designed specifically for the Toyota Camry vehicle and

may not work well on other vehicles. Please check the vehicle before installing to make

sure the camera can be properly placed

INSTALLATION INSTRUCTIONS:

OEM-6309

Wide-Angle OEM

Camera

Need help?

Do you have a question about the OEM-6309 and is the answer not in the manual?

Page 1 Camera INSTALLATION INSTRUCTIONS: The OEM-6309 is a special designed OEM camera with a custom snap-in style mounting bracket that allows it to be easily mounted to the vehicle. It is designed to be custom mounted on the license plate bezel for the Toyota Camry 2009-2011 vehicles with minimal installation time and with no special tools required for the job.
Page 2 The Camera will display the full width of most parking spaces up to 8 feet or even wider. 2. The OEM-6309 is design to be mounted on the License Plate bezel of a Toyota Camry vehicle. If you wish to mount this camera on any other vehicle, double check the mounting location to see if the camera will fit on your vehicle in your location of choice.
Page 3 MONITOR BLACK WIRE Chassis Ground YELLOW Connect to Monitor POWER CONNECTOR OEM-6309 TECH SUPPORT: (800) 998-6880 SPECIFICATIONS: 1/4 Inch Color CMOS Sensor Video Output: 1.0 V P-P composite (75 Ohm load) Dimension (In.): 1"(L) × 1⅜"(W) × 1"(D) Supply Voltage: +12VDC Weight: 4 Oz.
Page 4 DISCLAIMER: Under no circumstances shall the manufacturer or distributor of the Securview™ be held liable for consequential or incidental damages sustained in connection with the use of the Securview™ Rear Vision System. The Securview™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle.