Table of Contents
Advertisement
• Editing the SPECIAL Menu
To edit the SPECIAL menu (change set-
tings), proceed as for editing the CAM SET
UP menu above. Move the cursor to END
after the SET UP ENABLE appears. Then
press
and
seconds or more.
The SPECIAL menu appears on the moni-
tor. Select the item to be changed and
change the setting as described for the
CAM SET UP menu.
Important Notice:
When the cursor is moved to END and the CAM SET UP menu closed after changing
the parameters, the new values are saved in the EEPROM (Electric Erasable and
Programmable Read Only Memory). These values remain valid until new values are
saved, even if the power of the camera is off.
simultaneously for 2
** SPECIAL **
UP SIDE DOWN OFF
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
HUE
.I.......
-
CAMERA RESET
PUSH SW
RET
END
(To be continued reverse page)
+
Advertisement
Table of Contents
