Message Display - Panasonic Lumix DMC-F3 Operating Instructions Manual

Message Display

Confirmation or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[THIS MEMORY CARD IS WRITE-PROTECTED]
> The Write-Protect switch on the card is moved to [LOCK]. Move the switch back to unlock
it. (P16)
[NO VALID PICTURE TO PLAY]
> Record a picture or insert a card with a recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
> Delete the picture after canceling the Protect setting.
[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]
• Pictures not based on the DCF standard cannot be deleted.
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P26)
[NO ADDITIONAL SELECTIONS CAN BE MADE]
• The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETE MULTI] (P41), [FAVORITE] (P91), [TEXT STAMP]
been exceeded.
> Reduce the number of pictures set, and then repeat the operation.
• More than 999 Favorites have been set.
[CANNOT BE SET ON THIS PICTURE]
• [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the DCF standard.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE
CARD]
• There is no space left on the built-in memory or the card.
– When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
Others
(P94)
(P86)
- 116 -
or [RESIZE] (P88) has