Chapter 5: Connecting Your Wireless Usb Network Adapter; The Usb Icon; Usb Cabling - Linksys WUSB11 User Manual

9. The InstallShield Wizard will begin copying the files. The bar in the middle
of the screen below shows the percentage of files copied.
10. Once the Wireless USB Network Adapter Configuration Utility has been
successfully installed, the Wizard will ask you to restart your computer.
Select Yes, I want to restart my computer now, and then click the Finish
button to restart.
You have now completed the installation of your Wireless USB Network
Adapter Configuration Utility. To connect the Wireless USB Network
Adapter, please go to Chapter 5: Connecting Your Wireless USB
Network Adapter.
11
Instant Wireless
Figure 4-9
Figure 4-10
Series Wireless USB Network Adapter
TM
Chapter 5: Connecting Your
Wireless USB Network Adapter
Important for Windows 98, 2000, and ME users: You must install the
Adapter's software before installation of the hardware.
Important for Windows XP users: You must install the Adapter's
hardware before installation of the software.
To install your Wireless USB Network Adapter, first connect one end of the
USB cable to the Adapter. Then, connect the other end of the USB cable to the
USB port on your desktop or notebook PC. Since the Adapter gets its power
from the PC's USB port, there is no external power adapter. The Power LED
should light up green when the Adapter is attached and the PC is on.

The USB Icon

The USB icon shown below marks a USB port on a PC or device.

USB Cabling

The Wireless USB Network Adapter comes with one USB cable. One end of
the USB cable has a rectangular connector called a Type
A connector. The other end of the cable has a square
Type B connector.
The USB cable's Type B tip connects to the USB device,
that is, your USB Network Adapter. The Type A end
connects to a computer's USB port.
The picture shows two USB ports as they might appear
on your computer. Note the two USB icons marking the ports.
Figure 5-1
Figure 5-2
12