External Components; Bluetooth; Playing An External Component - JVC KD-X200 Instruction Manual

External components

External components
You can connect an external component to the AUX (auxiliary) input jack on the faceplate.
For details, refer also to the instructions supplied with the external components.

Playing an external component

from AUX
3.5 mm stereo mini plug
with "L" shaped connector
(not supplied)
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.

Bluetooth

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (AUX) on the faceplate of the unit.
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
unit.
Operations may be different depending on the connected Bluetooth device. For details, refer also to
the instructions supplied with the device.
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1 Register (pair) a Bluetooth device with KS-BTA100.
2 Change the <SRC SELECT> settings of this unit.
(Hold)
3 Press MENU to exit.
10 | ENGLISH
Portable audio
player, etc.
KS-BTA100
Blue/white
Black
Brown
.
1 Connect to AUX terminal on the faceplate.
2 Select <AUX>.
3 Turn on the connected component and
start playing the source.
Wiring harness of the unit
(A page 19)
Blue/white: Remote
Black: Ground
Brown: Tel muting
<SRC SELECT>
<AUX>
<BT ADAPTER>