Philips PET741/37 Service Manual page 3

1.0 TECHNICAL SPECIFICATION
Factory Service Mode (FSM)
Procedure to change region code of your DVD
Portable
1. Power ON the DVD player and do not insert
DISC inside player
2. Setup Prefer
Press the key in the sequence as
| |
| |
The LCD display showed the existing region
Code.
3. Press (navigation up) or
down) repeatedly to select the number from 0
to 6.
4. Then press OK to confirm your region code.
5. Refer below table for your region code setting
Select "0" setting = Region Free (confidential)
Procedure for SW upgrade
1. Please burn the "PHILIPS.BIN" file into a
empty disc.
2. Power on PET741 with AC/DC adapter
3. The set will detect the upgraded SW
4. Press "OK" to confirm and proceed
5. The set will reset once finished upgrade
Warning: Do not unplug the AC adapter
during firmware upgrade to prevent flash
corrupt of the set!!
Procedure to check SW version of your DVD
Portable
General
1. Setup
Press the key in the sequence as
Then a menu will be show XX-YYYY-MM-
DDD
| | |
(navigation