Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Galactic TXT ● IEC power cable – 1,75 m ●...
Galactic TXT Safety Instructions Every person involved with the installation, operation and maintenance of this device has to: ● be qualified ● follow the instructions of this manual Before your initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.
• The user is responsible for correct positioning and operating of the Galactic TXT. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Galactic TXT Laser safety for a Class 4 Laser Product This product is a Class 4 laser with 215 mW visible output. Class 4 is the highest and most dangerous class of laser, including all lasers that exceed the Class 3B AEL.
Galactic TXT There are no user serviceable parts inside. Tampering or removing warranty seals will void your products limited warranty. Combo label with the Product Model Number, Serial Number, Date of Manufacturing, Laser Light Warning Label, Warranty Void Label and Interlocked Housing Label...
Galactic TXT The Galactic can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious damage to people and property ! Connection with the mains Connect the device to the mains with the power-plug.
Galactic TXT Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Galactic TXT Description of the device Features The Showtec Galactic TXT is a laser effect with high output and great effects. ● Power Input: AC 100-240V, 60/50Hz ● Power Consumption: 12 Watt ● Beam Diameter <20mm at aperture ● Laser Class: 4 ●...
Galactic TXT Backside Fig. 02 09) Interlock 10) Remote control plug 11) 3-pin DMX signal connector OUT 12) 3-pin DMX signal connector IN 13) PS/2 keyboard connector 14) Power switch ON/OFF 15) Ground/Earth connection 16) IEC power connector 100-240VAC + Fuse T1A/250V...
Page 13
Galactic TXT The Interlock plug/remote plug and safety keys are included in the box. The interlock is the ―included-in-the-box‖ successor for the optional remote interlock (51316) They should be kept with the Galactic laser !!! The following safety precautions should be followed: ●...
Galactic TXT Control Modes There are 7 modes: Built-in programs (stand-alone) Sound-controlled Text mode, page 18 Time Mode, page 18 Countdown mode, page 19 Master/Slave DMX-512 (20CH) One Galactic (Stand-alone) 01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
Galactic TXT Multiple Galactics (DMX Control) 01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket.
Galactic TXT Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Galactic TXT Control Panel A) LED display MENU button C) UP button D) DOWN button ENTER button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.)
Galactic TXT Main Menu Options Built-in Auto Shows Sound-controlled Shows Text Mode Time Mode Countdown Mode DMX-512 Mode Master/Slave Mode System Settings Before using the control modes, it is highly advised to get acquainted with the chapter on keyboard operations, page 21 1.
Galactic TXT 04) While the display shows , press the UP and DOWN buttons. The display will show 05) Press the ENTER button to enter time display settings. 06) There are several adjustable time display parameters. Press the ENTER button to toggle between:...
Galactic TXT 8. System Settings In this menu you can adjust the show display settings. 01) While in the main menu, press the UP and DOWN buttons until the display shows 02) Press the ENTER button to enter the display options edition.
Galactic TXT Keyboard It is possible to operate the device by means of the included keyboard. The keyboard should be plugged into the PS/2 keyboard connector (13) on the backside of the device. 1. Built-in Auto Shows 01) Press the key to proceed to the main menu.
Galactic TXT 3. Text Mode In this menu you can create and edit custom texts which can be displayed during a show. 01) Press the key to proceed to the main menu. 02) Press the UP and DOWN cursors until the display shows 03) Press the ENTER key to proceed to edition mode.
Page 24
Galactic TXT Y-axis rotation settings Counterclockwise rotation Clockwise rotation Rotation OFF X-axis rotation settings Clockwise rotation Counterclockwise rotation Rotation OFF Z-axis rotation settings Clockwise rotation Counterclockwise rotation Rotation OFF Wafe effect settings Wave range Wave frequency Wave speed Press the UP and DOWN cursors to adjust the intensity of each of those parameters.
Galactic TXT 08) To display all the texts one-by-one, press the key. All the saved texts will now be displayed in a sequence. 09) Press the PgUP and PgDN keys to toggle manually between your saved texts. 10) To call up one particular text, press the key combination of key and the numeric keys, 0-9.
Galactic TXT 08) To change the values of the forementioned parameters, press the UP and DOWN cursors. 09) If you need to flip the time display, press repeatedly the key and choose one of the 4 available options: Normal View...
Galactic TXT 8. System Settings In this menu you can adjust the show display settings of the device. 01) Press the key to proceed to the main menu. 02) While in the main menu, press the UP and DOWN cursors until the display shows 03) Press the ENTER key to enter the display options edition.
Galactic TXT Remote Control Button Function Description On / Off Switch the device ON or OFF Auto Mode Activate Built-in Auto Shows mode Sound-controlled Mode Activate Sound-controlled mode Time Mode Activate Time mode Countdown Mode Activate Countdown mode Text Mode...
Galactic TXT 3. Time Mode 01) Press the button to activate Time mode. 02) Press and hold down the button for 3 seconds to enter edition mode and adjust the following time parameters: Year Month Hour Minutes Seconds 12- or 24-hour Display Mode (not adjustable with the remote control) 03) Press the buttons to adjust the values of the parameters from step 2.
Galactic TXT DMX Channels 20 channels Channel 1 – Shutter 0-31 Laser off 32-255 Laser on Channel 2 – Pattern progression 0-31 form 32-63 form 64-95 form 96-127 form 128-159 form 160-191 form 192-223 form 224-255 form Channel 3 – Patterns Ch 2 and Ch 3 are connected to each other.
Page 31
Galactic TXT Channel 9 – Y-axis rotation speed 0-255 Y-axis rotation speed, from fast to slow Channel 10 – X-axis rotation 0-127 Manual X-axis rotation adjustment 128-191 Clockwise rotation 192-255 Counterclockwise rotation Channel 11 – X-axis rotation speed 0-255 X-axis rotation speed, from fast to slow Channel 12 –...
Galactic TXT Maintenance The Showtec Galactic requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth. Wipe the front glass panel clean with glass cleaner and a soft cloth.
Page 34
Galactic TXT Problem Probable cause(s) Remedy One or more No power to the fixture. ● Check that power is switched on and fixtures do not cables are plugged in. function at all Primary fuse blown.. ● Replace fuse. Fixtures reset The controller is not connected.
Need help?
Do you have a question about the Galactic TXT and is the answer not in the manual?
Questions and answers