Page 1
Christie Vive Audio S215 Sub- woofer U s e r M a n u a l 020-101266-02...
Page 3
Christie Vive Audio S215 Sub- woofer U s e r M a n u a l 020-101266-02...
Page 4
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Page 5
Addendum Translated copies of this document are provided on the CD in the back of this document. The CD may also contain additional product documentation. Read all instructions before using or servicing this product. 本 文档 的翻译副本在本文档背面的 C D 上提 供。 该 CD 中还 可能 包含 其他 产品 文 档...
Observe load ratings and all applicable local safety codes. • Only use attachments or accessories specified by Christie. • To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
What’s in the box? This table lists the components that are shipped with the S215. Quantity Description Part number Christie S215 subwoofer 145-103105-XX Christie S215 subwoofer with grill 145-127101-XX Christie Vive Audio S215 Subwoofer User Manual 020-101266-02 Rev. 1 (04-2015)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio S215 Subwoofer User Manual 020-101266-02 Rev. 1 (04-2015)
Use the BKT-LAx and BKS-SUB brackets to platform mount a S215 subwoofer and an LA2, LA3, LA4, or LA5 line array speaker. For mounting instructions, see the appropriate Christie Vive Audio BKT-LAx Bracket User Manual and the Christie Vive Audio BKS-SUB User Manual.
The LA2, LA3, LA4, or LA5 line array speaker and the S215 subwoofer are independently flown, according to installer best practices, using seven rigging wires and any legally required redundant safety cables. S215 subwoofer Line array speaker Christie Vive Audio S215 Subwoofer User Manual 020-101266-02 Rev. 1 (04-2015)
The LA2, LA3, LA4, or LA5 line array speaker is mounted below the S215 subwoofer with the corresponding BKL-LAx bracket kit (for example BKL-LA3). For mounting instructions, see the appropriate Christie Vive Audio BKL-LAx Bracket User Manual. S215 subwoofer...
• Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio S215 Subwoofer User Manual 020-101266-02 Rev. 1 (04-2015)
100 dB (40-150 Hz) Sensitivity , 1 W/1 m Recommended amplifier power 830 W - 1500 W (FTC) at 4 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance 4 Ohms Measured at 2 m, ground plane conditions.
99 cm x 76.8 cm x 50.8 cm (39 in.) x (30.2 in.) x (20 in.) Weight (net) 56 kg (124 lb) Parts Specification Part Number 15 in. cone driver 003-120883-XX Christie Vive Audio S215 Subwoofer User Manual 020-101266-02 Rev. 1 (04-2015)
Need help?
Do you have a question about the Vive S215 and is the answer not in the manual?
Questions and answers