Summary of Contents for Christie Vive Audio S218LP
Page 1
Christie Vive Audio S218LP Low Profile Subwoofer U s e r M a n u a l 020-101268-03...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
The S218LP low profile subwoofer is used for low frequency effects (LFE) channel applications. What’s in the box? This table lists the components that are shipped with the S218LP. Quantity Description Part number Christie S218LP low profile subwoofer 145-181101-XX Christie Vive Audio S218LP Low Profile Subwoofer User Manual 020-101268-03 Rev. 1 (03-2018)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio S218LP Low Profile Subwoofer User Manual 020-101268-03 Rev. 1 (03-2018)
(not provided in the box), according to laws and regulations applicable to the venue. The S218LP subwoofer cannot be flown. Christie Vive Audio S218LP Low Profile Subwoofer User Manual 020-101268-03 Rev. 1 (03-2018)
Verify that the negative and positive speaker wires from the speaker are securely connected to the terminals on the amplifier. • Verify that there are no missing screws. Replace all screws that you removed during installation. Christie Vive Audio S218LP Low Profile Subwoofer User Manual 020-101268-03 Rev. 1 (03-2018)
Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio S218LP Low Profile Subwoofer User Manual 020-101268-03 Rev. 1 (03-2018)
100.5 dB (40-150 Hz) Sensitivity , 1 W/1 m Recommended amplifier power 1500 W - 2150 W (FTC) at 4 Ohms / Christie CDA5 or Christie CDA7.5 (depending on application) Rated impedance 4 Ohms Rated for free space conditions at 1 m. Measured at 2m, ground plane conditions, with value calculated for free space conditions at 1 m.
Need help?
Do you have a question about the Vive Audio S218LP and is the answer not in the manual?
Questions and answers