Advertisement
4.1 - How to register Control Panel H
Set home automation controller entering to learning status as follow:
Set home automation controller entering to learning status as follow:
i.
[RESET]
Home Automation Control Panel
·System is in Day mode.
·Press [SET] to go into Program Mode
·When cursor is on SETUP character, press [SET] to go
into SETUP program mode
·Rotate [SET] to select Output Device.
Then press [SET] to go into Output Device function.
·Rotate [SET] to select Output 1
Note: Learning B IR Signal must to be selected other output device number.
Then press [SET] to go into setup output device 1 function.
·Rotate [SET] to select Device Type.
Then press [SET] to go into Output Device Type function.
·LCD display current output device type
Rotate [SET] to select IR Signal type.
·Rotate [SET] to select A signal.
Note: Learning B IR Signal must to be selected B signal.
·Press [SET] to go to "Tx Learn Data".
Note: Controller transmits learn data, ID save to Output device
LA5597 IR Transmitter Operation Manual
POWER
[SET]
[ACTION]
- 3 -
08:00
01- Jan
DAY
08:00
01- Jan
ACT INFO
SETUP
SETUP MENU
Setup System?
SETUP MENU
Output Device?
OUTPUT DEVICE
Output 1?
OUTPUT DEVICE
Device Type?
Device Type
IR Signal?
IR Signal
A
Output Device
Tx Learn Data?
Advertisement
