Table of Contents
Advertisement
2. Unit Description
2.1. Front Panel
Figure 2.1: Instrument Front Panel
¬
CLEAR: Restarts the MDS operating program without
changing user-selected parameter settings or breaking
port connections.
ON: Lights when AC Power is applied to the unit.
®
SET: Used to initialize the MDS to the defaults specified
by Setup Switch configuration. To initialize the MDS,
press and hold both the SET button and the CLEAR button,
release only the CLEAR button, and then release the
SET button.
When the MDS is initialized, all command-selected
parameters will be cleared, and the MDS will revert
to the default parameters specified by the current Set-
Up Switch configuration.
¯
RDY: Flashes to indicate the unit is operational.
°
ACTIVITY: The Activity LEDs light to indicate that a
corresponding port is receiving data. Note that the model
shown here is the MDS-16 (16 ports), model MDS-8 has
eight Activity indicators.
Note:
2-1
Advertisement
Table of Contents
