Table of Contents
Advertisement
Cabling Management - Gabinets & Racks - Rack Accessories - KVM - LP-RU07KVXX Series KVM with 4, 8 and 16 Port
CHANNEL DISPLAY DURATION: Time the tip window last.
Options are following:
3 SECOND The tip window lasts for 3seconds.
ALWAYS ON The tip window always on the screen.
Move the highlight bar to an option and press [Enter] to select it.
CHANNEL DISPLAY POSITION: Position of the tip window.
A small blue window appears on the screen. Use arrow key to move it, then press [Enter] to specify the
position.
SCAN DURATION: Duration for scanning one port.
Options are 3 seconds, 5 seconds, 10 seconds, 15 seconds, 20 seconds, 30 seconds, 40 seconds, 60
seconds. Move the highlight bar to an option and press [Enter] to select it.
OSD ACTIVATING HOTKEY: Select OSD activating hotkey.
[Ctrl] [Ctrl] Set hotkey as [Ctrl] [Ctrl].
[Scroll] [Scroll] Set hotkey as [Scroll] [Scroll].
[Shift] [Shift] Set hotkey as [Shift] [Shift].
[Alt] [Alt] Set hotkey as [Alt] [Alt].
Move the highlight bar to an option and press [Enter] to select it.
SET PASSWORD: Set new password.
First enter old password, then enter new password and confirm it. The new password is set. If error
occurs, the screen will remind users.
CLEAR THE NAME LIST: Clear the names of port list.
You need to enter password to clear the names of port list.
RESTORE DEFAULT VALUE: Restore settings to default value.
You need to enter password to Restore settings to default value.
Note: The user password will also be cleared, and the factory password will not.
LOCK CONSOLE: Lock the console.
You cannot switch or scan after you lock the console (including switch by push button on the panel or
OSD). You need to enter password to set.
Note: After Locking the console, you can also unlock the console by this option. It also needs password
verification.
Please follow the directions below when installing, using and maintaining it in
order to guarantee the device to work well.
When installing and operating the device, please make sure proper power
supply first, and then do other operations after it is initialized.
As signal and power transfer need custom cable, please use matched cable,
unmatched cable may cause system work improperly or even damage the
device.
Keep airy during operating to prevent high temperature.
Keep the device away from working long in wet environment to prevent short circuit.
Please do not open the device without permission of professionals.
LanPro is continuously improving its products and reserves the right to change specifications and availability without prior notice.
PS2/USB Capable Switch with 15, 17 or 19 inch LCD Monitor. User Manual.
Safe Guide
compliant
16
www.lanpro.com
Advertisement
Table of Contents
