LightwaveRF LW921 Instruction Manual page 14

Setting up the LightwaveRF App
Linking to the LightwaveRF Apps
To use the LightwaveRF App or Web App
to control the Home Thermostat, you will
first need to install the 'Lightwave Link'.
This allows any LightwaveRF devices to be
linked to and controlled by a smartphone,
tablet or PC. The Thermostat can be linked
to the App using the following method:
1.
Download the App and follow the
in-App setup instructions to setup the
Lightwave Link and App. Access the
'Heating Page' and follow the instructions
regarding how to add a device.
2.
When prompted, press and release the
'Link' button on the Thermostat ('link' will
flash on the screen).
3.
Send the linking command from the
App (the in-App instructions will explain
how to do this). 'Link Ok' will flash on the
screen to indicate a successful link.